how to draw a 3d temple

Download Article

Download Article

Shapes are some of the first things you probably learned to draw. With a piffling practice, you lot can make those shapes appear iii-dimensional. In about cases, you'll only need to describe a line that curves on your shape to create perspective. One time yous have the outline of a 3D shape, imagine where the calorie-free source is hitting it and shade the opposite side heavily.

  1. 1

    Make a circle using a pen or pencil. Draw the circle and then it's as broad every bit you lot'd like the sphere to be. Press lightly so you can easily become back and shade in the sphere. For a petty assist drawing a circle, trace something round or employ a compass.[1]

  2. 2

    Describe a curved line across a circumvolve to create a 3-dimensional sphere. You can make the line curve up or downward in the eye of the circumvolve to suggest the viewer is looking at the sphere from below or higher up. Bend the line as far up or downwards as you desire, keeping in mind that a shallow curve gives you a side-view perspective.[2]

    • If yous'd like to show even more 3-dimensional detail, depict a dotted or dashed line that curves beyond the circle in the reverse direction of your line. The dotted line implies that you lot're looking behind the sphere.

    Advertisement

  3. three

    Apply heavy pressure to shade a sliver of the sphere's side and bottom. Make up one's mind where light hits your sphere and begin shading along the contrary side of the sphere where the shadow would fall. Then, apply a little less pressure as you shade in the curved heart of the sphere. Use a calorie-free touch on to shade merely a little where the calorie-free would striking the sphere.[3]

    • For case, if light hits the top right of the sphere, printing firmly along the lesser left portion of the sphere to make a shaded crescent.

    Advertisement

  1. 1

    Draw 2 overlapping squares that are the same size. Make a simple square that's any size y'all similar. So, place your pencil in the centre of the square and sketch another square from this bespeak so y'all have 2 squares that overlap slightly.[4]

    • Information technology's of import to make the squares the aforementioned size or they won't form a cube when y'all connect them.
  2. ii

    Make straight lines that connect the corners of the squares. Describe a direct line from one corner of a foursquare to the matching corner of the other square. Repeat this for each corner to create a cube.[5]

    • Make the straight lines connecting each corner parallel to make the cube realistic.

    Tip: If yous don't want all the lines to be visible, erase the 3 connecting lines that are in the eye of the foursquare that's closest to yous.

  3. 3

    Shade one side of the cube dark and use calorie-free pressure to shade the other sides. Since 1 side of the cube will be blocked from a light source, shade it in heavily so it's noticeably dark. Then, apply medium or light pressure to shade the tiptop of the box and the other visible side of the cube.[half-dozen]

    • To make the cube even more realistic, depict a square-shaped shadow coming from the dark side of the cube.

    Ad

  1. 1

    Sketch a Five shape using a pen or pencil. If you can draw a triangle, you tin can easily make a cone. Depict a V shape or sketch it upside down as though you're starting to draw a triangle without its base.[seven]

    • Make the V shape as large as yous'd like the cone to exist.
  2. 2

    Draw an oval at the base of the V shape. Lightly sketch an oval shape that connects the two widest points of the 5 shape. This seals off the shape to create a 3-dimensional cone.[viii]

    Tip: If you lot're making an upside-down V shape, you lot could shade in a shadow from the bottom of one side.

  3. 3

    Darken 1 side of the cone and gradually shade to the opposite side. Rub the tip of your pencil back and forth along ane side of the cone until information technology's heavily shaded. Apply a little less pressure as yous shade towards the middle of the cone and use a low-cal impact the opposite side.[9]

    • Add a little more shading along the bottom of the cone near the darker side of the cone.

    Advertisement

  1. one

    Make an equilateral triangle. Take a pencil and draw a triangle that has equal sides. An equilateral triangle also has 3 equal angles since the sides are the same length. If it helps, trace an equilateral triangle or use a ruler then you get exact measurements.[10]

  2. two

    Sketch another triangle coming from 1 side of your equilateral triangle. Identify your pencil at the top of the equilateral triangle and make a straight line that comes downwardly towards the side of the first triangle, but don't allow information technology reach as far every bit the bottom of the start pyramid. Then, depict a straight line connecting the bottom of this line with the corner of the first pyramid.[eleven]

    • Make the top angle of the side pyramid between 20 and 40 degrees so your pyramid doesn't look unbalanced.

    Tip: If you lot'd like to show the view within the pyramid, draw a foursquare using a dashed line along the base of operations of the triangle. Make another dashed line from the back corner of the square to the top of the pyramid.

  3. 3

    Shade in 1 side of the pyramid and exit the other side lighter. Decide where the light is hitting your pyramid and shade the opposite side until it's dark. For example, if the light is hitting the side of the pyramid, shade in the front end and so it looks like it'due south in shadow.[12]

    • If you'd similar to include a shadow, shade in a triangular shape coming from the bottom of the pyramid.

    Ad

  1. 1

    Draw a triangle to brand the front end of the prism. You can make the triangle whatsoever size you similar. Consider making it big until yous become comfortable with drawing prisms. So, yous can effort making tiny triangular prisms.[13]

    • You can make any type of triangle you similar. Make an equilateral, isosceles, or a right triangle, for example.
  2. 2

    Create some other triangle that'southward the same size every bit the first triangle. Place this identical triangle where y'all want the prism to terminate. This triangle makes the back confront of the prism.[14]

    • Ensure that the triangles aren't touching or it will be hard to draw the remaining lines for the prism.
  3. 3

    Depict straight lines to connect each of the front triangle points with the dorsum points. Place your pencil on the summit of the front end triangle and draw a direct line to the top of the back triangle. Echo this for the other 2 points of each triangle to create a prism.[xv]

    Tip: If you'd similar the triangular prism to appear opaque, erase the middle lines of the prism.

  4. 4

    Shade in i side of the triangular prism. Call back near how the light is hitting the prism and shade in the other side of the prism until it's dark. For example, if low-cal is hitting the side of the prism, brand the front end face up nighttime.[16]

    • If you'd like the light to hitting the front of the prism, heavily shade in the side.

    Advertisement

Add New Question

  • Question

    How tin I describe a rectangular prism?

    Community Answer

    You tin can make a rectangular prism by turning the squares in the cube instructions into rectangles.

  • Question

    How do I describe a pyramid?

    Community Answer

    Look at the finished triangular prism. Think, a triangular prism is a pyramid, don't let the names fool yous!

  • Question

    How exercise I draw a 3D pentagon?

    Community Answer

    If y'all want it to be like a rectangular prism, merely a pentagon, I recommend drawing the 2 pentagons and and then connecting the corners. The second pentagon will be slightly above and to the left of the start, just they volition still overlap.

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

  • You can brand a rectangular prism by connecting two squares with directly parallel lines.

  • Use a ruler to make perfectly straight lines for your iii-dimensional shapes.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

  • Precipitous pencil
  • Newspaper or drawing pad
  • Colored pencils, optional

Nearly This Article

Commodity Summary Ten

To draw a 3D shape, starting time past drawing a foursquare in the center of a slice of paper. And so, draw another square above it and to the right. The bottom left of the second square should intersect the top right of the kickoff square, creating a smaller square between the two. Next, connect the corners of the first square to the corners of the second square with straight lines. Finally, erase the inside lines so that yous're left with a solid cube. For tips on how to describe other 3D shapes, like cylinders or pyramids, keep reading.

Did this summary help you?

Thanks to all authors for creating a folio that has been read 167,534 times.

Did this commodity help you?

sixthistil.blogspot.com

Source: https://www.wikihow.com/Draw-3D-Shapes

0 Response to "how to draw a 3d temple"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel